Jettribe Watercraft cover did not plan to be the best cover out
on the market. But it just turne out that way.

Originally, there were only a few built for our Jettribe’s staff use,
We were getting sick and tired of using covers that were light, thin, and that flapped around on the freeway.

We at Jettribe are true riders and build products that we actually use ourselves! We are simple people here at Jettribe. We wanted to build a better cover, using thicker and heavier material . Our covers are about twice as heavy and thick as the other brands. Our Jettribe covers
are typically 9-12 lbs. Compare to otherbrands at 4-6 lbs!  Sure it cost more to ship, but look at what you are getting.Flapping on the freeway? We added 4,1.5” webbing detachable tie downs, plus we ran shock cord bungee all around the bottom leading edge. For weather resistance, our materials are specially UV coated.It took us nearly two years to figure out the formulation!  For water resistancethe material is coated with PVC backing to keep out the water.  All our seems are triple
stitched and finished off with a binding. No exposed seams! The inside hood area is linedwith soft nytex material to protect your PWC’s from getting scratched paint. All pin or eye bow areas are reinforced with our tough “Frog Skin” material.  When fueling up, most of our covers have a zippered gas flap.Talk is talk, but seeing is believing, Check out our Jettribe covers at your local dealer.  They are truly a perfect quality, fit, finish, and a true work of art!